Real‐time electro‐diffusion method to discriminate carbon nanomaterials

We report both the experimental and theoretical insights of differential electro‐diffusion behavior of carbon nanomaterials (e.g. single wall, multiwall carbon nanotubes, and graphene). We thus discriminate one from the other in a soft gel system. The differential mobility of such material depends on their intrinsic properties, both extend and rate of migration bearing the discriminatory signature. The mobility analysis is made by a real time monitoring of the respective bands.     

氧化石墨超声时间对三维还原氧化石墨烯结构及超级电容性能的影响

将氧化石墨凝胶超声不同时间制备氧化石墨烯(GO)溶胶,再以GO溶胶为前驱体采用一步水热法制备了三维还原氧化石墨烯(3DRGO),采用X射线衍射(XRD)、拉曼光谱、原子力显微镜(AFM)、扫描电子显微镜(SEM)和电化学测试等研究了不同超声时间对3DRGO的形貌、结构及超级电容性能的影响.结果表明,当超声时间不超过120 min时,经水热反应后还原氧化石墨烯均能形成稳定的三维结构,但随着超声时间的延长,三维结构尺寸不断减小,强度增加,样品的内部结构也由片状逐渐向多孔网状转化;当超声时间超过120 min时,还原氧化石墨烯虽具有网状结构,但在宏观上不利于形成稳定的三维结构.电化学测试结果表明,经不同超声时间所制备的还原氧化石墨烯均表现出较好的超级电容性能,其中超声时间为120 min时制备的3DRGO具有更均匀的多孔网状结构,表现出了最佳的超级电容性能,在1 A/g电流密度下其比电容可达328 F/g,即使在20 A/g的大电流密度条件下,其比电容仍可高达240 F/g.     

Localization and Dynamics of Long‐Lived Excitations in Colloidal Semiconductor Nanocrystals with Dual Quantum Confinement

Semiconductor nanocrystals consisting of a quantum dot (QD) core and a quantum well (QW) shell, where the QD and QW are separated by a tunneling barrier, offer a unique opportunity to engineer the photophysical properties of individual nanostructures. Using the thicknesses of the corresponding layers, the excitons of the first and second excited states can be separated spatially, localizing one state to the QD and the other to the QW. Thus the wave function overlap of the two states can be minimized, suppressing non‐radiative thermalization between the two wells, which in turn leads to radiative relaxation from both states. The molecular analogy to such dual emission would be the inhibition of internal conversion, a special case that violates Kasha′s rule. Using nanosecond time‐resolved spectroscopy of QDQW CdSe/ZnS onion‐like nanocrystals, an intermediate regime of exciton separation and suppressed thermalization is identified where the non‐radiative relaxation of the higher‐energy state is slowed, but not completely inhibited. In this intermediate thermalization regime, the temporal evolution of the delayed emission spectra resulting from trapped carriers mimic the dynamics of such states in nanocrystals that consist of only a QD core. In stark contrast, when a higher‐energy metastable state exists in the QW shell due to strongly suppressed interwell thermalization, the spectral dynamics of the long‐lived excitations in the QD and QW, which are spectrally distinct, are amplified and differ from each other as well as from those in the core‐only nanocrystals. This difference in spectral dynamics demonstrates the utility of exploiting well‐defined exciton localization to study the nature and spatial dependence of the intriguing photophysics of colloidal semiconductor nanocrystals, and illustrates the power of nanosecond gated luminescence spectroscopy in illuminating complex relaxation dynamics which are entirely masked in steady‐state or ultrafast spectroscopy.     

Sol‐to‐Gel Transition in Fast Evaporating Systems Observed by in Situ Time‐Resolved Infrared Spectroscopy

The in situ observation of a sol‐to‐gel transition in fast evaporating systems is a challenging task and the lack of a suitable experimental design, which includes the chemistry and the analytical method, has limited the observations. We synthesise an acidic sol, employing only tetraethylorthosilicate, SiCl₄ as catalyst and deuterated water; the absence of water added to the sol allows us to follow the absorption from the external environment and the evaporation of deuterated water. The time‐resolved data, obtained by attenuated total reflection infrared spectroscopy on an evaporating droplet, enables us to identify four different stages during evaporation. They are linked to specific hydrolysis and condensation rates that affect the uptake of water from external environment. The second stage is characterized by a decrease in hydroxyl content, a fast rise of condensation rate and an almost stationary absorption of water. This stage has been associated with the sol‐to‐gel transition.     

Photophysics of a Ruthenium 4H‐Imidazole Panchromatic Dye in Interaction with Titanium Dioxide

The photophysics of bis(4,4′‐di‐tert‐butyl‐2,2′‐bipyridine‐κ²N,N′)[2‐(4‐carboxyphenyl)‐4,5‐bis(p‐tolylimino‐κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO₂ film. The studied substitution pattern of the 4H‐imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H‐imidazole ligand that has been previously investigated. Protonation at the 4H‐imidazole ring decreases the excited‐state lifetime in solution. When the unprotonated dye is anchored to TiO₂, photoinduced electron injection occurs from thermally nonrelaxed triplet metal‐to‐ligand charge transfer (³MLCT) states with a characteristic time constant of 0.5 ps and an injection efficiency of roughly 25 %. Electron injection from the subsequently populated thermalized ³MLCT state of the dye does not take place. The energy of this state seems to be lower than the conduction band edge of TiO₂.     

Multi‐constituent determination and fingerprint analysis of Scutellaria indica L. using ultra high performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry

An ultra‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry method integrating multi‐constituent determination and fingerprint analysis has been established for quality assessment and control of Scutellaria indica L. The optimized method possesses the advantages of speediness, efficiency, and allows multi‐constituents determination and fingerprint analysis in one chromatographic run within 11 min. 36 compounds were detected, and 23 of them were unequivocally identified or tentatively assigned. The established fingerprint method was applied to the analysis of ten S. indica samples from different geographic locations. The quality assessment was achieved by using principal component analysis. The proposed method is useful and reliable for the characterization of multi‐constituents in a complex chemical system and the overall quality assessment of S. indica.     

Laboratory Performance Evaluation on Analysis of Cadmium and Lead in Herb through Participation in the Regional Laboratory Comparison APMP QM-P10

The ubiquitous presence of heavy metals in the environment arising from various natural and anthropogenic activities have led to the accumulation intrusion of these substances into agricultural products including herbal plants. With the rapid growth of herbal medicine trade market, extensive surveillance monitoring and laboratory testing of heavy metals in herbal samples are carried out worldwide nowadays. Those surveillance activities are very much rely on the quality of the data produced by analytical laboratory. As analysis of heavy metals have been one of several main interests of our laboratory of Research Center for Chemistry, then participation on the international laboratory comparison such as APMP.QM-P10: Cadmium and Lead in Herb is a valuable effort for evaluate laboratory performance in this area of analysis. Several trial run and validation had been performed on the proficiency samples, including sample preparation, level of method blanks, use of matrix modifiers, precision and also trueness check using suitable reference material. Z-scores of 0.787 and 1.105 for cadmium and lead respectively have obtained as result of participation. It was found that the z-scores were satisfactory compared to the satisfactory limit of -2 ≥ z-score ≤ 2. These results provide strong confirmation of maintained capability of Research Center for Chemistry on heavy metals analysis, particulary in herb.     

Effects of the formation time of parton shower on jet quenching in heavy-ion collisions

Jet quenching has successfully served as a hard probe to study the properties of Quark-Gluon Plasma (QGP). As a multi-particle system, jets require time to develop from a highly virtual parton to a group of partons close to mass shells. In this study, we present a systematical analysis on the effects of this formation time on jet quenching in relativistic nuclear collisions. Jets from initial hard scatterings were simulated with Pythia, and their interactions with QGP were described using a Linear Boltzmann Transport (LBT) model that incorporates both elastic and inelastic scatterings between jet partons and the thermal medium. Three different estimations of the jet formation time were implemented and compared, including instantaneous formation, formation from single splitting, and formation from sequential splittings, before which no jet-medium interaction was assumed. We found that deferring the jet-medium interaction with a longer formation time not only affects the overall magnitude of the nuclear modification factor of jets but also its dependence on the jet transverse momentum.     

基质辅助激光解析/电离飞行时间质谱(MALDI-TOF MS)在微生物鉴定中的应用*

基质辅助激光解析/电离飞行时间质谱(MALDI-TOF MS)是一种新型软电离生物质谱,具有检测速度快、操作简便、结果准确等优点,目前已成为可靠的微生物快速鉴定技术。就工作流程而言,与常规生化方法相比,MALDI-TOF MS可以将微生物鉴定的时间缩短为一天甚至更短。对于具有抗生素耐药性的微生物,使用MALDI-TOF MS鉴定也有很好的准确性。在病毒鉴定中,MALDI-TOF MS也可以发挥作用,已有报道将MALDI-TOF MS和机器学习(ML)分析方法结合来检测鼻拭子中SARS-CoV-2。此外,MALDI-TOF MS还可用于细菌的无光谱库鉴定。目前,MALDI-TOF MS正通过与其他技术(例如傅里叶红外光谱FTIR)相结合进一步扩大微生物鉴定范围。     

基于实时无标记技术研究流式分选后细胞活性的检测方法

利用流式细胞法、细胞计数试剂盒（CCK-8）法、实时细胞功能分析（RTCA）法分别检测分选前后细胞的活性,综合比较了3种方法的检测原理、操作特点等。结果显示,流式细胞法测得的分选后细胞凋亡率为（3.85 ± 0.008）%,分选前细胞凋亡率为（14.09 ± 0.021）%,分选后细胞凋亡率低于分选前,具有统计学差异（P < 0.05）;分选前后的活细胞比例显示,分选后活细胞比例高于分选前,具有显著性统计学差异（P < 0.001）。CCK-8法测得的分选后细胞活性高于分选前,具有显著性统计学差异（P < 0.001）;RTCA法测得的分选后细胞连续增殖活性明显高于分选前,具有极显著性统计学差异（P < 0.000 1）。结果显示,相较于CCK-8法和流式细胞法,RTCA法的细胞用量少、可回收,操作简便,无需标记,检测灵敏度高,可获得实时动态的细胞生长曲线,适合研究分选后细胞长效动态的活性变化,可为基础和临床分选后活细胞的功能研究提供检测手段。